Mobile moisture meter supporting DIN EN ISO 15512:2019 “Plastics – Determination of water content“.

The Big Compounder B-TSE-S 30/40 is an electrically heated, co-rotating twin screw extruder (Ø 30 mm) with integrated drive and openable liner for process monitoring and easy cleaning. With a throughput of up to 100 kg per hour, it is suitable for use in the pilot plant as well as for small-scale pr…

The Farinograph-TS rheometer provides you with a reliable, reproducible picture of the water absorption and kneading properties of flours, in consideration of international standards.

The new generation torque rheometers. Test materials from numerous application areas with regard to their processing/plasticizing behavior, such as melting behavior, heat and shear stability, plasticizer absorption etc.

With the Mini-Compounder B-TSE-A 12/36 you develop high-performance materials on a lab scale. The modular concept provides maximum flexibility in the application areas of plastics, rubber, pharmaceuticals, and others.

The Twin-Screw Compounder B-TSE-A 20/40 is an electrically heated, co-rotating twin-screw extruder (Ø 20 mm) as a measuring attachment for the MetaStation 8/8E and 16 drive units for compounding small quantities of material and additiveson a laboratory scale.

TwinLab-C 20/40 is a stand-alone twin screw extruder. The drive contains an integrated motor. Due to extensive configuration possibilities, the solution can be used for a wide variety of materials. The directly driven extruder is designed for use in material development, -testing and smallest produ…

Measure viscosity and flow properties of fluids, pastes, slurries and semi-solids with particulates.

The Absorptometer C determines the oil number according to ASTM D 2414, ASTM 3493 (Carbon Black) and ASTM D 6854 (Silica).

The Amylograph-E provides you with a reliable, reproducible picture of enzyme activity (α-amylases) in flours and whole grains. This enables you to make statements on flours’ suitability for baking and control the dosing of, for example, baking malt or enzyme preparations.

The Auto-Grader continuously determines the melt flow rate, film purity, and transparency – within seconds online with polymer production.

A universal, compact and robust laboratory mill. Among other things, this solution is ideal for milling grain. Use this solution to process wheat, rye, barley, oats, rice and maize, as well as pseudocereals, pulses, spices, coffee, pasta, and many other materials.

The conveyor belt takes off and transports your extruded profiles from any Brabender extruder or Extrusiograph.

Integrate the Food cutting device into your extrusion process for laboratory operation or even for small-scale production. The elaborate concept allows a wide range of applications in the area of food and feed manufacturing.

With the Elatest you determine the density of polymers, in particular of rubber and unvulcanized rubber compounds.

Reliably determine rheological dough properties via stretch resistance using the Extensograph-E

The Brabender measuring extruders and the Extrusiograph 19/25 and 19/32 are electrically heated measuring attachments which, in combination with a modular drive unit, can be used to test the extrusion properties of thermoplastics.

Measurement of shear stresses, shear rates and viscosity of polymers and other plasticizable substances.

Measure the transparency and optically check the quality of blown or flat films on a laboratory or production scale.

Use this compact system for fully automated optical inspection of extruded films.

The modular table drive of the new generation. Analyze polymers and ceramic compounds for their processing/plasticizing behavior, such as melting behavior, heat and shear stability, plasticizer absorption, etc.

The powerful modular stand drives of the new generation. Examine polymers and ceramic masses with regard to their processing/plasticizing behavior, such as melting behavior, heat and shear stability, plasticizer absorption, etc.

Develop and optimize materials on a laboratory scale with the space-saving and flexible compact extruder. The hinged laboratory extruder is easy to clean and offers optimal access to your laboratory process.

An electronic moisture meter that works on the principle of heat drying in circulating air (oven drying method). In this method, the sample’s loss of weight resulting from the drying procedure is determined.

Create pasta and similar products with the pasta nozzle head. Special feature: The head can be cooled with both air and water.

Examine a variety of material properties under real production conditions in the laboratory.

Sample preparation of grain with new, easy to clean design. The laboratory mill creates laboratory flours in a multi-stage process. The flour samples are especially close to meeting real world conditions, and are virtually the same as commercially produced flours. It can create flour samples from wh…

The laboratory mill creates laboratory flours in a multi-stage process. The flour samples are especially close to meeting real-world conditions, and are virtually the same as commercially produced flours. It can create flour samples from wheat, spelt, rye, barley and rice.

Determine all shear rate ranges of relevance under continuous processing conditions. Calculate viscosity and shear rate including the corresponding corrections by the software. Evaluate the shear stability and heat resistance based on the measurement data obtained.

Determine all shear rate ranges of relevance under continuous processing conditions. Calculate viscosity and shear rate, including the corresponding corrections by the software. Evaluate the shear stability and heat resistance based on the measurement data obtained.

This versatile mill shreds fibrous, tough and firm materials to adjustable degrees of fineness, enabling you to prepare sample material for further analyses.

This special mill was developed for preparing samples of grain for the Zeleny sedimentation test. This analysis provides you with reliable statements on the baking properties of flour and grain.

This standalone solution enables you to examine the processing behaviour of materials in the plastics, food and feed sector as well as in other areas.

The Brabender KE 30/25 D compact extruder is an extrusion system with integrated drive, as well as integrated temperature and speed controller. Thanks to extensive configuration options, a wide variety of materials can be run with the solution. The direct-driven extruder is designed for use in mater…

Anisothermal stress relaxation test for characterization of elastomers and determination of crosslinking density.

A standalone solution for food extrusion at lab scale. Modify and texturise various materials, such as for example proteins, starch, fish feed, cereals and pasta.

Cool flat film take-off and wind up at high speed.

The vertical force feeder with integrated control electronics is a compact Hygienic Design screw feeder for dust-free feeding of bulk materials for Brabender extruders in laboratory format.

Use the water bath for cooling extruded profiles.

The Winder can be used as a downstream unit in any extrusion line for taking off and winding up round strands and hoses made of different materials such as elastomers, thermoplastic elastomers or thermoplastics.

The Brabender AutoCalibration allows you to validate your Farinograph-TS Mixer with one simple measurement. Make sure that the quality matches your requirements and you can trust your results. Small deviations can be automatically corrected.

Guaranteeing the quality of your measurement results on a lasting basis.

Investigate various properties of powders (including PVC, flour) such as liquid absorption and drying time according to international standards.

Test your measurement equipment whenever you like, quickly and easily.

The Aqua-Inject is an automatic water dosing unit and is used as an additional device in conjunction with the Farinograph-TS/-E (USB).

The blown film take-off unit is used in combination with an extruder and a film blowing die head for simultaneous inflation, cooling, flattening, take-off and winding of an extruded film tube.

With this solution, you can reliably and gently separate particles of flour that are still stuck to the bran. This enables you to increase the yields obtained with your Quadrumat Junior or Quadrumat Senior by up to around 10 %.

The counter-rotating conical twin screw extruder is ideal for quality control, product development and research purposes.

The Corio CD-200F refrigerated circulator for heating and cooling is suitable for external temperature control tasks or for temperature control directly in the thermostat bath. Providing high heating/cooling capacities for short heating and cooling times, it is suitable for standard tasks and routin…

In conjunction with a torque rheometer, you can use the Brabender 19/10 DW extruder to produce round and garvey profiles on a laboratory scale.

Connected to a drive unit, the Brabender Extruder and Extrusiograph 30/25 and 30/32 can be used to process thermoplastics on a laboratory scale.

The FarinoAdd-S300 is an accessory for the Farinograph mixer, which allows testing the quality of gluten-free flours or visco-inelastic doughs.

The user-friendly Brabender feeders can be replaced quickly and cover a wide range of applications.

Validate purity and precisely determine impurity concentrations in spinnable polymers (e.g. PET, PA) and other thermoplastic melts.

Film-blowing die heads for film extrusion are available in two versions: as spiral mandrel distributors and as quills with easily exchangeable inserts. In this way, you realize different bubble diameters for the production of different film widths. Co-extrusion dies are also available on request.

Examine the appearance and contours of the extrudate with the Garvey die head. For rubber and tire manufacturing: Material testing complies with ASTM D 2230 standard.

The hardness and structure tester is used as a measuring attachment for the Brabender Farinograph to determine the dissolution of malt in the brewery and the hardness of grain.

The internal mixer 350 S is mainly used in the rubber and caoutchouc industry for mixing and compounding tasks or for material testing.

The Internal Mixer 350 SX with intermeshing blades is specially designed for use in the rubber industry. Use the powerful measuring mixer for compounding and preparation tasks or for material testing.

Internal mixer heads of the 350 series are available with liquid heating/cooling and with electric heating and air cooling. Due to the large mixer volumes of 370 to 440 cm³, these mixers are frequently used for producing sample compounds for subsequent tests.

Our solution for storing, managing and searching your measurement data, independent of the device manufacturer. The first step into the digitalization of your laboratory. Brabender MetaBridge instruments have an automated process to upload data to labfolder. We offer our customers an opportunity to …

As an extruder attachment for a modular drive unit, the Brabender 19/20 measuring extruder is used for processing thermoplastics as well as ceramic and electrode compounds.

Evaluate thermoplastics, thermosets, elastomers, ceramic molding compounds, fillers, pigments and many other plastic or plasticizable materials.

Use the measuring mixers with a kneading chamber volume of 30 cm³/50 cm³ for the analysis of thermoplastics, WPC and HME.

The Brabender N 50 / N 50 EHT with cam blades and the B 50 / B 50 EHT with Banbury blades are the standard measuring mixers for testing natural and synthetic elastomers.

The Measuring Mixer S 10 is used for Farinograph tests with small sample quantities (10 g) and is thus particularly suitable for applications in grain breeding and research.

The Brabender Measuring Mixers W 30 / W 30 EHT and W 50 / W 50 EHT are optionally liquid or electrically heated measuring attachments with roller blades for the analysis of thermoplastics.

These measuring kneaders with delta blades are used for thermosets.

Brabender S 300 Measuring Mixer—Slim design and low total weight for improved handling.

The Measuring Mixer S 50 is used for standard Farinograph tests with 50 g flour according to ICC, AACC, ISO.

MetaBridge is the cross-device software solution for Brabender devices. Whether you need simple workflows to be compliant with international standards or flexible processes for research and development, MetaBridge will support you in your daily needs.

The MetaBridge Controller is the plug & play upgrade solution for our established devices such as the Farinograph-E, Extensograph-E or our extruders. Benefit from the latest modernizations and trends without having to purchase new equipment.

The standalone version of the MetaBridge allows a software upgrade for our established devices such as the Farinograph-E, Extensograph-E or our extruders. You can benefit from the latest modernization and trends without having to purchase new equipment.

The Micro Extensograph is a conversion kit for the Extensograph-E that allows the Extensograph method to be performed with reduced volume of dough (from 150g per sample to 20g per sample).

A modular die system for the production of texturised plant protein with meat-like texture in combination with a laboratory extruder.

Increase the extrusion output in strand extrusion by using a multi-strand die. Depending on your needs, you can choose between a two-strand die or a four-strand die. In each case, you have access to different ranges of strand diameters.

Up to 4 strands with diameters of 1 to 4 mm can be pelletized with the Brabender pelletizer.

The proving cabinet upgrades an Extensograph or Extensograph-E with three additional proving chambers including accessories for the simulation of the fermentation process.

Analyze rheometric properties of polymer melts to precisely describe flow behavior.

Use the ribbon die head to produce flat products such as films, tapes, and sheets. This nozzle category is suitable for applications in plastics, rubber, food, and feed. Depending on the application, we offer three different versions. Each version offers a spectrum of different gap widths and openi…

The round strand die head is equipped with a heating collar. Screw-in dies with a die diameter of 1 mm to 7 mm can usually be used, depending on the product. Different products can be extruded with the screw-in nozzles. The round strand die head is the only extrusion die head that can be equipped wi…

Use the Single Screw Extruder 19/25 in combination with one of our drive units to test the extrusion properties of various materials, such as snacks, pasta, breakfast cereals, animal feed and rice at laboratory scale, so that you can optimize your recipes.

Investigate and develop a wide variety of raw materials with these interchangeable attachments. A variety of screw geometries, die head designs and downstream equipment are available for a wide range of applications.

Measure the diameter of your extrudate highly precisely and contactless.

With the tubing die head, you extrude pipes and tubes. Thanks to easily exchangeable die inserts, different diameters and material strengths can be realized. In this way, you will spare yourself the entire replacement of the nozzle head.

The Brabender Twin-Screw Compounder TSC 42/6 is used for continuous mixing and plasticizing of powder and granular thermoplastics and elastomers.

Optimum adaptation of the processing machines for laboratory and small-scale production to processing tasks for most different polymers.

Wrap wires with polymer coatings. Different diameters are possible. In combination with the Brabender Wire Take-off Unit, you can realize a complete wire production line on a laboratory scale.

Takes off the coated wire and wind it up with the Wire take-off unit.