Please confirm your location to see specific content for your region:
Germany
change

Products


Find product solutions with just a few clicks

Use the search window or narrow down your search using the filter options under “Products” and “Product category” to get the best hits. Once you have made your selection, close the filter window with a mouse click.

Aquatrac-V

Mobile moisture meter supporting DIN EN ISO 15512:2019 “Plastics – Determination of water content“.

show product

B-TSE-S 30/40

The B-TSE-S 30/40 is an electrically heated, co-rotating twin screw extruder (Ø 30 mm) with integrated drive and openable liner for process monitoring and easy cleaning. With a throughput of up to 100 kg per hour, it is suitable for use in the pilot plant as well as for small-scale production of var…

show product

Convimeter II

The Convimeter II enables viscosity measurement and process control in the production and development of liquids and pastes. The innovative measurement concept also opens the way for many measurement methods previously reserved for offline rheology to be used in production environments.

show product

Farinograph-TS

The Farinograph-TS rheometer provides you with a reliable, reproducible picture of the water absorption and kneading properties of flours, in consideration of international standards.

show product

MetaStation 4E / 8(E) /16

The new generation torque rheometers. Test materials from numerous application areas with regard to their processing/plasticizing behavior, such as melting behavior, heat and shear stability, plasticizer absorption etc.

show product

Prep-Center

The Prep-Center is designed for small batch preparation. A cost effective drive unit that can accommodate any Brabender Mixer/Measuring Head and/or Extruder Attachment.

show product

B-TSE-A 20/40

The B-TSE-A 20/40 is an electrically heated, co-rotating twin-screw extruder (Ø 20 mm) as a measuring attachment for the MetaStation 8/8E and 16 drive units for compounding small quantities of material and additiveson a laboratory scale.

show product

TwinLab-C 20/40

TwinLab-C 20/40 is a stand-alone twin screw extruder. The drive contains an integrated motor. Due to extensive configuration possibilities, the solution can be used for a wide variety of materials. The directly driven extruder is designed for use in material development, -testing and smallest produ…

show product

TwinLab-F 20/40

A standalone solution for food extrusion at lab scale. Modify and texturise various materials, such as for example proteins, starch, fish feed, cereals and pasta.

show product

ViscoQuick

The Brabender ViscoQuick measures the rheological properties of fluids, slurries, cremes, sauces and pastes at variable shear and temperature conditions for a wide range of applications. Additionally, the gelatinization and cooling behaviors of various kinds of starch and starch-containing products …

show product

Absorptometer C

The Absorptometer C determines the oil number according to ASTM D 2414, ASTM 3493 (Carbon Black) and ASTM D 6854 (Silica).

show product

Amylograph-E

The Amylograph-E provides you with a reliable, reproducible picture of enzyme activity (α-amylases) in flours and whole grains. This enables you to make statements on flours’ suitability for baking and control the dosing of, for example, baking malt or enzyme preparations.

show product

B-TSE-A 12/36

With the B-TSE-A 12/36 you develop high-performance materials on a lab scale. The modular concept provides maximum flexibility in the application areas of plastics, rubber, pharmaceuticals, and others.

show product

Break Mill SM 4

A universal, compact and robust laboratory mill. Among other things, this solution is ideal for milling grain. Use this solution to process wheat, rye, barley, oats, rice and maize, as well as pseudocereals, pulses, spices, coffee, pasta, and many other materials.

show product

Consistometer

The New Consistometer Model E utilizes high precision torque cell technology to measure the viscosity of Newtonian and non-Newtonian materials

show product

Elatest

With the Elatest you determine the density of polymers, in particular of rubber and unvulcanized rubber compounds.

show product

Extruder / Extrusiograph 19/25 and 19/32

The Brabender measuring extruders and the Extrusiograph 19/25 and 19/32 are electrically heated measuring attachments which, in combination with a modular drive unit, can be used to test the extrusion properties of thermoplastics.

show product

Glutograph-E

The Brabender Glutograph-E enables you to measure viscoelastic properties by shearing the sample. This enables you to determine the quality of wet and dry gluten or of dough, for example.

show product

GlutoPeak

In a fast procedure, the Brabender GlutoPeak measures the gluten quality of whole grain, flour, vital gluten and baking mixtures. The results provide evidence of suitability for various intended purposes.

show product

MetaStation 4E table drive

The modular table drive of the new generation. Analyze polymers and ceramic compounds for their processing/plasticizing behavior, such as melting behavior, heat and shear stability, plasticizer absorption, etc.

show product

MetaStation 8(E) /16

The powerful modular stand drives of the new generation. Examine polymers and ceramic masses with regard to their processing/plasticizing behavior, such as melting behavior, heat and shear stability, plasticizer absorption, etc.

show product

Micro Visco-Amylo-Graph

The Brabender Micro Visco-Amylo-Graph measures temperature-dependent and time-dependent viscosity properties, especially of flours, starches and other materials. Furthermore, it also provides you with information on enzyme activity (α-amylases).

show product

Mini-Compounder KETSE 12/36

Develop and optimize materials on a laboratory scale with the space-saving and flexible compact extruder. The hinged laboratory extruder is easy to clean and offers optimal access to your laboratory process.

show product

Moisture Tester MT-CA

An electronic moisture meter that works on the principle of heat drying in circulating air (oven drying method). In this method, the sample’s loss of weight resulting from the drying procedure is determined.

show product

Pasta die head

Create pasta and similar products with the pasta nozzle head. Special feature: The head can be cooled with both air and water.

show product

Quadrumat Junior

Sample preparation of grain with new, easy to clean design. The laboratory mill creates laboratory flours in a multi-stage process. The flour samples are especially close to meeting real world conditions, and are virtually the same as commercially produced flours. It can create flour samples from wh…

show product

Quadrumat Senior

The laboratory mill creates laboratory flours in a multi-stage process. The flour samples are especially close to meeting real-world conditions, and are virtually the same as commercially produced flours. It can create flour samples from wheat, spelt, rye, barley and rice.

show product

Rotary Mill

This versatile mill shreds fibrous, tough and firm materials to adjustable degrees of fineness, enabling you to prepare sample material for further analyses.

show product

Sedimat

This special mill was developed for preparing samples of grain for the Zeleny sedimentation test. This analysis provides you with reliable statements on the baking properties of flour and grain.

show product

Stand-alone Extruder KE 30

The Brabender KE 30/25 D compact extruder is an extrusion system with integrated drive, as well as integrated temperature and speed controller. Thanks to extensive configuration options, a wide variety of materials can be run with the solution. The direct-driven extruder is designed for use in mater…

show product

TSSR-Meter

Anisothermal stress relaxation test for characterization of elastomers and determination of crosslinking density.

show product

Vertical forced feeder

The vertical force feeder with integrated control electronics is a compact Hygienic Design screw feeder for dust-free feeding of bulk materials for Brabender extruders in laboratory format.

show product

Viscograph-E

The Viscograph-E provides you with a complete picture of the gelatinisation behaviour of starches and all types of modified starches.

show product

Aqua-Inject

The Aqua-Inject is an automatic water dosing unit and is used as an additional device in conjunction with the Farinograph-TS/-E (USB).

show product

Auto-Grader

The Auto-Grader continuously determines the melt flow rate, film purity, and transparency – within seconds online with polymer production.

show product

AutoCalibration for Farinograph-TS

The Brabender AutoCalibration allows you to validate your Farinograph-TS Mixer with one simple measurement. Make sure that the quality matches your requirements and you can trust your results. Small deviations can be automatically corrected.

show product

Blown film take-off unit

The blown film take-off unit is used in combination with an extruder and a film blowing die head for simultaneous inflation, cooling, flattening, take-off and winding of an extruded film tube.

show product

Bran Duster

With this solution, you can reliably and gently separate particles of flour that are still stuck to the bran. This enables you to increase the yields obtained with your Quadrumat Junior or Quadrumat Senior by up to around 10 %.

show product

CORIO CD-200F Refrigerated / heating circulator

The Corio CD-200F refrigerated circulator for heating and cooling is suitable for external temperature control tasks or for temperature control directly in the thermostat bath. Providing high heating/cooling capacities for short heating and cooling times, it is suitable for standard tasks and routin…

show product

CuttingDevice

Integrate the Food cutting device into your extrusion process for laboratory operation or even for small-scale production. The elaborate concept allows a wide range of applications in the area of food and feed manufacturing.

show product

Extruder 19/10 DW

In conjunction with a torque rheometer, you can use the Brabender 19/10 DW extruder to produce round and garvey profiles on a laboratory scale.

show product

FarinoAdd-S300

The FarinoAdd-S300 is an accessory for the Farinograph mixer, which allows testing the quality of gluten-free flours or visco-inelastic doughs.

show product

Feeders

The user-friendly Brabender feeders can be replaced quickly and cover a wide range of applications.

show product

Filtratest

Validate purity and precisely determine impurity concentrations in spinnable polymers (e.g. PET, PA) and other thermoplastic melts.

show product

Film-blowing die head

Film-blowing die heads for film extrusion are available in two versions: as spiral mandrel distributors and as quills with easily exchangeable inserts. In this way, you realize different bubble diameters for the production of different film widths. Co-extrusion dies are also available on request.

show product

Garvey die head

Examine the appearance and contours of the extrudate with the Garvey die head. For rubber and tire manufacturing: Material testing complies with ASTM D 2230 standard.

show product

Hardness and structure tester

The hardness and structure tester is used as a measuring attachment for the Brabender Farinograph to determine the dissolution of malt in the brewery and the hardness of grain.

show product

Internal mixer 350 SX

The Internal Mixer 350 SX with intermeshing blades is specially designed for use in the rubber industry. Use the powerful measuring mixer for compounding and preparation tasks or for material testing.

show product

Internal mixers 350 E / 350 W / 350 B

Internal mixer heads of the 350 series are available with liquid heating/cooling and with electric heating and air cooling. Due to the large mixer volumes of 370 to 440 cm³, these mixers are frequently used for producing sample compounds for subsequent tests.

show product

labfolder

Our solution for storing, managing and searching your measurement data, independent of the device manufacturer. The first step into the digitalization of your laboratory. Brabender MetaBridge instruments have an automated process to upload data to labfolder. We offer our customers an opportunity to …

show product

Measuring mixer

Evaluate thermoplastics, thermosets, elastomers, ceramic molding compounds, fillers, pigments and many other plastic or plasticizable materials.

show product

Measuring Mixer S 10

The Measuring Mixer S 10 is used for Farinograph tests with small sample quantities (10 g) and is thus particularly suitable for applications in grain breeding and research.

show product

MetaBridge

MetaBridge is the cross-device software solution for Brabender devices. Whether you need simple workflows to be compliant with international standards or flexible processes for research and development, MetaBridge will support you in your daily needs.

show product

MetaBridge Controller

The MetaBridge Controller is the plug & play upgrade solution for our established devices such as the Farinograph-E, Extensograph-E or our extruders. Benefit from the latest modernizations and trends without having to purchase new equipment.

show product

MetaBridge Standalone

The standalone version of the MetaBridge allows a software upgrade for our established devices such as the Farinograph-E, Extensograph-E or our extruders. You can benefit from the latest modernization and trends without having to purchase new equipment.

show product

Micro Extensograph

The Micro Extensograph is a conversion kit for the Extensograph-E that allows the Extensograph method to be performed with reduced volume of dough (from 150g per sample to 20g per sample).

show product

Multi strand die

Increase the extrusion output in strand extrusion by using a multi-strand die. Depending on your needs, you can choose between a two-strand die or a four-strand die. In each case, you have access to different ranges of strand diameters.

show product

Planetary Mixer P 600

Investigate various properties of powders (including PVC, flour) such as liquid absorption and drying time according to international standards.

show product

Proving cabinet

The proving cabinet upgrades an Extensograph or Extensograph-E with three additional proving chambers including accessories for the simulation of the fermentation process.

show product

Rheometric round capillary die head

Determine all shear rate ranges of relevance under continuous processing conditions. Calculate viscosity and shear rate including the corresponding corrections by the software. Evaluate the shear stability and heat resistance based on the measurement data obtained.

show product

Rheometric slot capillary die head

Determine all shear rate ranges of relevance under continuous processing conditions. Calculate viscosity and shear rate, including the corresponding corrections by the software. Evaluate the shear stability and heat resistance based on the measurement data obtained.

show product

Ribbon die head

Use the ribbon die head to produce flat products such as films, tapes, and sheets. This nozzle category is suitable for applications in plastics, rubber, food, and feed. Depending on the application, we offer three different versions. Each version offers a spectrum of different gap widths and openi…

show product

Round strand die head

The round strand die head is equipped with a heating collar. Screw-in dies with a die diameter of 1 mm to 7 mm can usually be used, depending on the product. Different products can be extruded with the screw-in nozzles. The round strand die head is the only extrusion die head that can be equipped wi…

show product

Single-screw extruder 19/25

Use the Single Screw Extruder 19/25 in combination with one of our drive units to test the extrusion properties of various materials, such as snacks, pasta, breakfast cereals, animal feed and rice at laboratory scale, so that you can optimize your recipes.

show product

Single screw extruder and Extrusiograph

Investigate and develop a wide variety of raw materials with these interchangeable attachments. A variety of screw geometries, die head designs and downstream equipment are available for a wide range of applications.

show product

Tubing die head

With the tubing die head, you extrude pipes and tubes. Thanks to easily exchangeable die inserts, different diameters and material strengths can be realized. In this way, you will spare yourself the entire replacement of the nozzle head.

show product

Winder

The Winder can be used as a downstream unit in any extrusion line for taking off and winding up round strands and hoses made of different materials such as elastomers, thermoplastic elastomers or thermoplastics.

show product

Wire coating die head

Wrap wires with polymer coatings. Different diameters are possible. In combination with the Brabender Wire Take-off Unit, you can realize a complete wire production line on a laboratory scale.

show product

Login

Please log into the site.

You do not have access yet or have forgotten your access data? Then please contact us! Contact