Moisture tester MT-CA: the new generation – Now even more flexible

intended use

An electronic moisture meter that works on the principle of heat drying in circulating air (oven drying method). In this method, the sample’s loss of weight resulting from the drying procedure is determined.


Moisture tester MT-CA

  • Simultaneous analysis of up to 10 samples is possible
  • International and precise (<0.1%) reference methods
  • No material-specific calibration required
  • Easy, error-free operation and maintenance
  • Gentle, uniform drying temperature (up to 200°C) for precise results
  • New web-based MetaBridge laboratory management software
  • Large touch screen, extra ports: for external PCs and HDMI
  • Fully automatic measurement of moisture in the widest range of materials

 

You have a specific type of problem or need a special configuration?

Contact us

We will gladly answer your questions. Please complete all information in the fields below. We will contact you as soon as possible.

I accept the terms of the privacy policy.

 

All fields marked with * are required.


Fully automatic measurement of moisture in the widest range of materials

With the moisture tester, you can analyse up to ten samples at once.

There is no need for calibration, cooling times and the weighing of sample quantities, which results in enormous time savings. Thanks to cooling in the desiccator, distorted results and weighing errors are avoided.

You are able to freely select the desired drying time. Fully automatic reweighing following drying, along with the recording of drying curves, guarantees maximum convenience of use.

And what’s more, the large touch screen means that operation is child’s play. Plus the new, web-based MetaBridge software enables you to access your measurement results across all sites and platforms.

From the list of methods, select the desired method, with drying temperature, drying time and sample weight with tolerance range. The precision electronic scales enable you to weigh various sample sizes in the range 1g to 20g.

The sample is placed on the rotary plate and drying begins. The material to be analysed will later be weighed directly in the drying area. Test materials can be inserted at different times, even when other materials are still drying.

  • Grain
  • Flour
  • Starch
  • Gluten
  • Rice
  • Coffee
  • Dough
  • Pasta products
  • Tobacco
  • Sweets and snacks
  • Animal feed
  • Textiles
  • Paper
  • Glue
  • Milling industy
  • Baked good industry
  • Cereal growers
  • Cereal merchants
  • Pasta industry
  • Animal feed industry
  • Paper industry
  • Adhesive industry
  • Brewing industry
  • Confectionary- / Snackindustry
  • Tobacco industry
  • Coffee industry
  • Textiles industry
Mains connection 1x 220/230 V; 50/60 Hz + N +PE; 7.5 A
115 V; 50/60 Hz + PE; 14 A
Dimensions (W x H x D) 550 x 680 x 630 mm (without Touchscreen)
820 x 680 x 630 mm (with Touchscreen)
Weight approx. 80 kg net
Drying temperature max. 200°C in the drying chamber
Heating capacity 1100 W
Sample weight min. 1 g, max. 20 g (optional setting of a tolerance range)
Number of samples max. 10 at a time
Measuring range 0.1 to 99,9% water content
Accuracy < 0.1% water content
Display resolution 0.001 g
Reproducibility (balance) ± 0.002 g
Memory parameters
  • Sample position in the drying chamber
  • Sample specifi cation
  • Sample weight
  • Relative loss in weight
  • 10 methods
Data input / output
  • Large touch-screen display
  • USB port for printer
  • HDMI inteface
  • Network (Ethernet) connection
Environmental conditions Temperature: 10 – 40°C

Cheat sheet Moisture Tester MT-CA

Brochure Moisture Tester MT-CA

Standards

  • ISO 712
  • ICC-Standard no. 110/1
  • VO (EG) Tobacco 2182/2005
Top