| |
 Laboratory Mill |
Laboratory two roll mill
The two roll mill is equipped with two rolls made of corrosion resistant steel, surface
hardened and polished. They are mounted in slide bearings which are automatically
oil lubricated by a central pump. High temperature sealings are used for the bearings.
The machine is equipped with two drive motors installed under the roll unit.
Transmission is done through roller chains on one side of the machine, in order to
separate the drive motors from the electrical side (heating).
Both rolls run at a fixed speed and with a constant friction ratio. Optionally, the motors
can be equipped with frequency converters which permits to
adjust friction of one of the rolls, speed of both rolls, and a
free adjustment of speed and friction.
Technical data | |
Roll diameter | 110 mm |
Roll width | 350 mm |
Working width | 280 mm |
Roll speed | 22/27 min-1 |
Power | 2 * 1.5 kW |
Torque | 500 Nm |
Roll temperature | up to 220° C |
Heating capacity (each roll) | 3.0 kW |
Dimensions (H*W*D) | 1250 * 1200 * 650 mm |
Weight | approx. 650 kg |
